Airfoil self noise reduction by non-flat plate type trailing edge serrations
Authors: T.P. Chong, P.F. Joseph, M. Gruber
Abstract:
This paper represents the results of a preliminary study which aims to reduce the airfoil trailing edge self noise by employing non-flat plate type trailing edge serrations. This configuration offers better structural strength and integrity, as well as a more straightforward manufacturing process compared to the conventional flat plate type serrations. We found that the non-flat plate serration not only reduces the broadband self noise significantly, but also eliminates the high-frequency noise that was observed by others who used flat plate type serration. However, due to the presence of certain bluntness at the sawtooth root, vortex shedding noise in a narrow frequency bandwidth is also produced. This extraneous noise is found to be less significant if a wider-angle serration is used. To increase the effectiveness of the proposed serration geometry a hybrid configuration composed of a non-flat plate type trailing edge serration with woven-wire mesh screen is employed for the reduction of the narrowband vortex shedding noise.
Keywords:
Airfoil self noise
Noise reduction
Trailing edge serration
Published in: Applied Acoustics (Volume 74, Issue 4, April 2013)
Publisher: Elsevier
ISSN Information: 0003-682X
Airfoil self noise reduction by non-flat plate type trailing edge serrations
- Vòng Sơ Khảo Cuộc Thi Đại Sứ Văn Hóa Đọc Năm 2024
- Hoạt động chào mừng "Ngày sách Việt Nam 21/4/2024"
- Ngày hội văn hóa đọc lần V
- Cuộc Thi Ảnh “Khoảnh Khắc VNUHCM Libraries”
- Ngày hội văn hóa đọc lần II
- Ngày hội văn hóa đọc lần IV
- Ngày hội văn hóa đọc lần III
- Tiếp GS Omer Mert Denizci, Trường ĐH Marmara Thổ Nhĩ Kỳ
- Tiếp Cô Claudia Tarzariol Từ The University Of Trento, Italy (Unitrento)
- Tiến sĩ kiều bào Mỹ tặng sách trị giá 150.000 USD cho sinh viên bách khoa
- Khảo sát ý kiến bạn đọc
-
Trực tuyến:8
-
Hôm nay:4830
-
Tuần này:31808
-
Tuần trước:28342
-
Tháng trước:57242
-
Tất cả:4020911