Magnetic amphiphilic nanocomposites produced via chemical vapor deposition of CH4 on Fe–Mo/nano-Al2O3

Authors: Aline A.S. Oliveira, Ivo F. Teixeira, Leandro P. Ribeiro, Eudes Lorençon, José D. Ardisson, Luis Fernandez-Outon, Waldemar A.A. Macedo, Flávia C.C. Moura

Abstract:
Catalytic chemical vapor deposition (CVD) using methane as carbon source was used to produce amphiphilic magnetic nanocomposites from Fe and Mo catalysts supported on alumina nanoparticles. The materials were reduced by hydrogen up to 900 ^◦C and after were partially coated by carbon during a CVD process with CH₄ also up to 900 ^◦C. TPR results showed that the Fe and Mo phases present in the composites were reduced mainly to Fe⁰, Mo⁰ and iron carbide that consequently confers interesting magnetic properties to the materials. The materials produced with different Fe/Mo contents show saturation of magnetization between 1.1 and 28.1 emu g−1 . Thermal analyses, CHN, Raman spectroscopy, SEM, TEM, EDS and BET showed that the higher the metal content, the more carbon was deposited on the materials. Carbon content of the materials varies from 2 to 16% and it is distributed mainly as nanotubes and nanofibers. These composites present excellent interaction on the interface between oil and water and are able to form emulsions as well as to break other stable emulsions. This feature is strategic to these composites as catalysts to act on the interface of biphasic systems. Preliminary studies of the materials as catalysts on biphasic oxidation of lipophilic dye Sudan-IV showed very promising results.

Keywords:
Amphiphilic
Magnetic
Emulsions
Biphasic reactions

Published in: Applied catalysis A: General  (Volume 456, Pages 1-248, 10 April 2013)

Publisher: Elsevier

ISSN Information: 0926-860X

Magnetic amphiphilic nanocomposites produced via chemical vapor deposition of CH4 on Fe–Mo/nano-Al2O3

Bình luận của bạn

*

*

*

*

 Captcha

Gửi bình luận nhập lại